FULLY AUTOMATIC DOUBLE TOP STOP MACHINE FOR METAL ZIPPERS

(Similar Machine Available for Synthetic Coil & Injected Zippers)

Features:

1. Heavy duty, precision high speed fully automatic double top stop machine, which simultaneously produces two (2) top stops from a coil of half-round brass or aluminum or enameled wire, with no waste, and attaches stops to the tape: one left and one right.
2. Machine is equipped with a variable speed drive for faster, more efficient production of long-length zippers.
3. Upon customer's specification, top stops can be attached after the slider is mounted on the zipper, or before slider is mounted.
4. Adaptable for applying top stops on separable zippers.
5. Machine can be adapted to attach fold-over double top stops on synthetic zippers.
6. Machine is designed with simplicity to facilitate ease of operation and minimum of maintenance.
7. One operator can oversee 3-4 machines: one automatic machine eliminates 3-4 operators of semi-automatic machines.

Technical Advantages:

• Precision machine, triggered electro-mechanically with a minimum of electronics.
• Wiring is color coded, and arranged for easy identification.
• Machine is inexpensive to maintain.
• Constructed for easy access to all parts. Working parts are visible and easily adjustable, if necessary.
• Controlled opening of zipper not required. Machine can operate with minimum opening of 1 1/2 inches.
• Machine is built with standard electrical components. Machine parts are stocked, standardized and interchangeable.

Capacity per 8 Hours:

40,000 zipper 7"

12,000 zipper 72"

Proportionate production for various zipper lengths.

A five (5) lb. Coil of Brass wire will make approx. 38,000 stops.

Afive (5) lb. Coil of Aluminum wire will make approx. 115,000 stops.

Characteristics:

2-Motors: 1/4 H.P. & 1/3 H.P. ; 110V or 220V ; 50 or 60 cy ; single phase ; or 220V or 380V or 440V ; 50 or 60 cy ; 3 phase.

ELECTRIC CONSUMPTION: 0.5 kw

WEIGHT: Bench Model-- 170lbs. net; 235 lbs. gross.

MEASUREMENTS: 23" x 19" x 30"

NOTE: When ordering machinery, specify electrical requirements and whether top stop should enter the slider mouth, or remain outside of the slider.